( TF09E00J54300065021FEAT00 )
Washer Motor Test
  1. Disconnect the 2P connector (A) from the washer motor (B).
  1. Test the motor by connecting battery power to the No. 1 (or No. 2) terminal, and ground the No. 2 (or No. 1) terminal of the washer motor. The motor should run.
    • If the motor does not run, or fails to run smoothly, replace it.
    • If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged washer motor outlet.