Door Key Cylinder Switch Test
With security
-
-
Disconnect the 10P connector (A) from the key cylinder switch (B).
-
Check for continuity between the terminals.
-
There should be continuity between the No. 8 [No. 7] and No. 10 [No. 5] terminals when the door key cylinder switch is in UNLOCK position.
-
There should be no continuity between the No. 8 [No. 7] and No. 10 [No. 5] terminals when the door key cylinder switch is in the neutral or LOCK position.
-
There should be continuity between the No. 9 [No. 6] and No. 10 [No. 5] terminals when the door key cylinder switch is in LOCK position.
-
There should be no continuity between the No. 9 [No. 6] and No. 10 [No. 5] terminals when the door key cylinder switch is in the neutral or UNLOCK position.
-
|
|