Immobilizer indicator does not go off
-
Turn the ignition switch to LOCK (0).
-
Connect the HDS to the data link connector.
-
Turn the ignition switch to ON (II).
-
Enter the IMMOBILIZER, then select the IMMOBILIZER INFORMATION.
-
Do the SYSTEM CHECK with the HDS.
YES
|
-
|
|
NO
|
-
|
Substitute a known-good
immobilizer-keyless control unit
, then register it and recheck. If the symptom goes away, replace the original
immobilizer-keyless control unit
.■
|
|