NOTE:
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.
-
Take care not to kink the cable.
-
The left rear seat cushion is shown, the right rear seat cushion is similar.
-
-
-
-
Remove the leg (A) from the seat cushion frame (B):
-1.
|
Disconnect the control cable.
|
-2.
|
Release the push nuts (C), then remove the set pins (D).
|
-3.
|
Remove the leg.
|
-4.
|
If necessary, remove the bushings (E), the cable hook (F), and the spring pins (G).
|
-
Install the leg in the reverse order of removal, and note these items:
-
Replace the push nuts and spring pins you removed with new ones.
-
Make sure the control cable is connected securely.
-
Apply multipurpose grease to the inside surfaces of the brackets (H).
|
|