Rear Seat Cushion Cover/Pad Replacement
|
NOTE:
-
When removing components, use the trim tools or equivalent.
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.
-
The left rear seat cushion is shown, the right rear seat cushion is similar.
-
-
-
Remove the screw and clip, then release the lib (A) and remove the recline cover (B).
|
|
-
Lift the leg (A), and remove the rear seat under cover cap (B).
|
Left rear seat cushion
Right rear seat cushion
|
-
Remove the screws and knobs (A). Release the hook strip (B) of the seat cushion cover (C) from the edge of the rear seat under cover (D) all the way around.
|
Left rear seat cushion
Right rear seat cushion
|
-
Remove the rear seat under cover (A) from the seat cushion frame (B).
|
Left rear seat cushion
Right rear seat cushion
|
-
Release the hooks (A) from the seat-back frame (B).
|
Left rear seat cushion
Right rear seat cushion
|
-
Remove the rear seat cushion cover/pad (A) and the silencer (B) from the rear seat cushion frame (C).
-
Install the rear seat cushion cover/pad in the reverse order of removal. To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks.
|
|
