( TF09E00J32300034541FHAT02 )
Front Individual Map Light Test/Replacement - With Sunshade

With sunshade
  1. Turn the map light switch OFF.
  1. Carefully pry the lens (A) off with a small screwdriver.
    Front Map Light:
    8 W x 2

  1. Remove the screws, then remove the map lights (B).
  1. Disconnect the connectors (C) from the map lights.

  1. Check for continuity between the terminals.
  1. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the map light.
  1. Install the light in the reverse order of removal.