( TF09E00J32113314805FEAT00 )
Brake Pedal Position Switch Test

  1. Disconnect the 4P connector (A) from the brake pedal position switch (B).
  1. Check for continuity between the No. 1 and No. 2 terminals.
    • There should be continuity when the brake pedal is pressed.
    • There should be no continuity when the brake pedal is released.
  1. Check for continuity between the No. 3 and No. 4 terminals.
    • There should be no continuity when the brake pedal is pressed.
    • There should be continuity when the brake pedal is released.
  1. If necessary, adjust or replace the switch, or adjust the pedal height.