( TF09E00J26220230101KDAT00 )
Glove Box Removal/Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
  • Take care not to scratch the dashboard and its related parts.
  • RHD model is shown; LHD model is symmetrical.
  1. Remove the bolts.

  1. While holding the glove box (A), release the glove box stops (B) on both sides from the dashboard by pushing them inside, then remove the glove box.
  1. Install the glove box in the reverse order of removal.