( TF09E00J26220219291KDAT10 )
Dashboard Center Panel Removal/Installation
Without Audio System
NOTE:
  • When removing components, use the trim tool or equivalent.
  • Take care not to scratch the dashboard and related parts.
  1. Open the passenger's tray lid.
  1. Remove the center panel (A).
    -1.
    While carefully lifting the panel with the appropriate trim tool, insert the trim tool into the gap (B) between the dashboard and the panel.
    -2.
    Use the trim tool to gently pry the panel up partially to release the clips (C, D), then pull the panel up to remove the panel.
    -3.
    Disconnect the hazard warning switch connector (E).
  1. Install the panel in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Push the clips into place securely.
    • Make sure each connector is plugged in properly.