( TF09E00J18526214913KBAT00 )
Bulkhead Under Spoiler Replacement
For Some Models
NOTE: Take care not to scratch the body.
  1. Detach the clips, then remove the bulkhead under spoiler (A) from the front bulkhead.
    NOTE: To remove the clips, pry the inner pin up at the edge near the line (B) on its head.
  1. Install the spoiler in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Push the clips into place securely.