( TF09E00J18513415019KBAT00 )
Rear Bumper Lower Trim Replacement
For Some Models
NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the rear bumper.
  1. Remove the clips and the hooks (B, C), then remove the rear bumper lower trim (D) from the rear bumper.
    NOTE: To remove the clips, pry the inner clip up at the edge near the line (E) on its head.
  1. Install the trim in the reverse order of removal, and note these items:
    • Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
    • Push the clips and the hooks into place securely.