( TF09E00D52100068015KBAT00 )
Yaw Rate-Lateral/Longitudinal Acceleration Sensor Replacement
NOTE:
  • Do not damage or drop the sensor as it is sensitive.
  • Do not use power tools.
  1. Turn the ignition switch to LOCK (0).
  1. Remove the yaw rate-lateral/longitudinal acceleration sensor (A) mounting nuts.
  1. Disconnect the yaw rate-lateral/longitudinal acceleration sensor 4P connector (B).
  1. Check for deformation in the bracket (C). If necessary replace it.
  1. Install the yaw rate-lateral/longitudinal acceleration sensor in the reverse order of removal.