Special Tools Required
Oil pressure gauge attachment PT 1/8
07406-0030000
Oil pressure gauge set
07506-3000001
NOTE: If the low oil pressure indicator stays on with the engine running, check the engine oil level. If the oil level is correct:
-
Remove the engine oil pressure switch, then install the special tools.
-
Start the engine. Shut it off immediately if the gauge registers no oil pressure. Repair the problem before continuing.
-
Allow the engine to reach operating temperature (fan comes on at least twice). The pressure should be:
Engine Oil Temperature:
|
80 °C (176 °F)
|
Engine Oil Pressure:
|
|
At Idle:
|
70 kPa (0.7 kgf/cm
2
, 10 psi) min.
|
At 3,000 rpm (min
−1
):
|
340 kPa (3.5 kgf/cm
2
, 50 psi) min.
|
-
If oil pressure is out of specifications, inspect these items:
|