Transmission Mount Replacement
-
-
-
With M/T model: Remove the battery cables (A) from the battery terminal fuse box.
-
With M/T model: Remove the harness clamps (B).
|
|
-
With M/T model: Remove the harness clamp (A). Remove the two bolts (B) and loosen the two bolts (C), then remove the battery base (D).
-
Support the transmission with a jack and wood block under the transmission.
|
|
-
Remove the ground cable (A), then remove the transmission mount bracket (B).
|
M/T model
A/T model
|
-
Remove the transmission mount.
-
Install the transmission mount and loosely tighten the new transmission mount mounting bolts, then tighten the transmission mount mounting bolts in the numbered sequence shown.
|
M/T model
A/T model
|
-
Install the transmission mount bracket (A), and loosely tighten the new transmission mount bracket mounting bolts and nuts (B).
-
Install the ground cable (C).
-
Raise the vehicle on the lift to full height.
|
M/T model
A/T model
|
-
Loosen the torque rod mounting bolt and nut (A).
|
M/T model
A/T model
|
-
Tighten the transmission mount mounting bolts and nuts in the numbered sequence shown.
-
Raise the vehicle on the lift to full height.
|
M/T model
A/T model
|
-
Tighten the torque rod mounting bolt and nut in the numbered sequence shown.
|
M/T model
A/T model
|
-
With M/T model: Install the battery base (A), then install the harness clamp (B).
|
|
-
With M/T model: Install the battery cables (A) to the battery terminal fuse box.
-
With M/T model: Install the harness clamps (B).
-
-
|
|
