Side Engine Mount Replacement
-
Remove the A/C line bracket mounting bolt.
-
Support the engine with a jack and wood block under the oil pan.
|
|
-
Remove the ground cable (A), then remove the side engine mount/bracket assembly (B).
-
Install the side engine mount/bracket assembly, then tighten the new side engine mount/bracket assembly mounting bolts (C).
-
Loosely tighten the new side engine mount/bracket assembly mounting nuts (D) and install the ground cable.
-
|
|
-
Loosen the transmission mount bracket mounting bolts and nuts (A).
-
Raise the vehicle on the lift to full height.
|
M/T model
A/T model
|
-
Loosen the torque rod mounting bolt and nut (A).
-
Lower the vehicle on the lift.
|
M/T model
A/T model
|
-
Tighten the side engine mount/bracket assembly mounting nuts in the numbered sequence shown.
|
|
-
Tighten the transmission mount mounting bolts and nuts in the numbered sequence shown.
-
Raise the vehicle on the lift to full height.
|
M/T model
A/T model
|
-
Tighten the torque rod mounting bolt and nut in the numbered sequence shown.
-
Lower the vehicle on the lift.
|
M/T model
A/T model
|
-
Install the A/C line bracket mounting bolt.
-
|
|