Engine Mount Torque Rod Bracket Replacement
-
Raise the vehicle on the lift to full height.
-
A/T model: Remove the shift cable cover.
-
Support the transmission with a jack and wood block under the transmission.
|
|
-
Remove the torque rod.
|
M/T model
A/T model
|
-
Remove the torque rod bracket.
-
Install the torque rod bracket.
|
M/T model
A/T model
|
-
Install the torque rod (A). Install the new bolt with the tab (B) on the bolt head aligned with the guide (C) on the front subframe, then tighten the new torque rod mounting bolt and nut in the numbered sequence shown.
|
M/T model
A/T model
|
-
A/T model: Install the shift cable cover.
|
|
