Sunroof Glass Height Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 2+0.5/-1 mm (0.08+0.02/-0.04 in.) all the way around. If not, make the following adjustment:

1.	Remove the bracket cover from each side.

2.	Loosen the nuts (A), and install the shims (B) between the glass frame (C) and glass bracket (D) on each side. Shim thickness:  Front and rear max. 2 mm (0.08 in.)

3.	If necessary, repeat on the opposite side.