Taillight Replacement

1.	Remove the rear bumper.

2.	Open the tailgate and remove the maintenance lid.

3.	Disconnect the connectors (A) from the taillight (B). Brake/Taillight:  21/5 W  Turn Signal Light:  21 W  Back-Up Light:  21 W  Rear Fog Light:  21 W (KG,KR and KE models)

4.	Remove the mounting nuts and the screw, then remove the taillight.

5.	When installing the taillight, check for the gasket; if it is distorted or stays compressed, replace it.

6.	After installing the taillight, run water over the taillight to make sure they do not leak.