| 1. | Raise the glass fully. |
| 2. | Remove these items: |
| 3. | Disconnect the lock rod (A) from the lock crank (B).
|
| 4. | With Super Locking: Remove the bolts, then remove the harness protector (A).
|
| 5. | Disconnect (and detach) the actuator connector (A). Remove the screws securing the latch (B). Take care not to bend the inner handle rod (C) and lock rod (D).
|
| 6. | Disconnect the inner handle rod (A) and lock rod (B) from the latch (C).
|
| 7. | Remove the bolts (A, B) securing the rear lower channel (C), then remove the collar (D).
|
| 8. | Move the latch (A) through the gap between the rear lower channel (B) and door, then remove it.
|
| 9. | Install the latch in the reverse order of removal, and note these items:
|