Master Cylinder Disassembly

Master Cylinder Disassembly

1.Remove the circlip (A) while pushing in the secondary piston (B).

 


2.Remove the reservoir (A).

 

3.Remove the stop pin (B) while pushing in the secondary piston (C).

4.Remove the secondary piston (A) and primary piston (B).

 

5.Remove the reservoir seal (A) from the reservoir cap (B).

 

6.Remove the strainer(C) and grommets (D) from the reservoir (E).

NOTE: When reservoir and master cylinder body are separated, replace the grommets with new ones.