| 3. | Check the cylinder head for warpage. Measure along the edges, and three ways across the center.
- If warpage is less than 0.08 mm (0.003 in.) cylinder head resurfacing is not required.
- If warpage is between 0.08 mm (0.003 in.) and 0.2 mm (0.008 in.), resurface the cylinder head.
- Maximum resurface limit is 0.2 mm (0.008 in.) based on a height of 120 mm (4.72 in.).
| Cylinder Head Height: | | Standard (New): | 119.9-120.1 mm
(4.720-4.728 in.) |
|