Steering

Item	Measurement	Qualification	Standard or New	Service Limit
Steering wheel	Rotational play measured at outside edge with engine running		0-10 mm (0-0.39 in.)
	Starting load measured at outside edge with engine running		29 N (3.0 kgf, 6.6 lbs)
Gearbox	Angle of rack guide screw loosened from locked position		12° Max.

Suspension

Item	Measurement	Qualification	Standard or New	Service Limit
Wheel alignment	Camber	Front	0°00¢±1°
		Rear	-1°00¢±1¢
	Caster	Front	2°10¢±1°
	Total Toe	Front	0±3 mm (0±0.12 in.)
		Rear	IN 2±2 mm (2± 0.08 in.)
	Front wheel turning angle equipped with 175/65 R14 82T tyres	Inside wheel	41°00¢
		Outside wheel	36°(Reference)
	Front wheel turning angle equipped with 185/55 R15 82V tyres	Inside wheel	38°00¢±2°
		Outside wheel	34°(Reference)
Wheel	Steel wheel runout	Axial	0-1.0 mm (0-0.04 in.)	2.0 mm (0.08 in.)
		Radial	0-1.0 mm (0-0.04 in.)	1.5 mm (0.06 in.)
	Aluminum wheel runout	Axial	0-0.7 mm (0-0.03 in.)	2.0 mm (0.08 in.)
		Radial	0-0.7 mm (0-0.03 in.)	1.5 mm (0.06 in.)
Wheel bearing	End play	Front	0-0.05 mm (0-0.002 in.)
		Rear	0-0.05 mm (0-0.002 in.)

Brakes

Item	Measurement	Qualification	Standard or New	Service Limit
Parking brake lever	Distance travelled when lever pulled with 196 N (20 kgf, 44 lbs) of force		7-10 clicks
Brake pedal	Pedal height (Carpet removed)	M/T	141 mm (5 9/16 in.)
		CVT	145 mm (5 11/16 in.)
	Free play		1-5 mm (0.04-0.2 in.)
Master cylinder	Piston-to-pushrod clearance		0-0.4 mm (0-0.02 in.)
Front brakes (disc brake)	Disc thickness		21.0 mm (0.83 in.)	19.0 mm (0.75 in.)
	Disc runout		———	0.10 mm (0.004 in.)
	Disc parallelism		———	0.015 mm (0.0006 in.)
	Pad thickness		9.0 mm (0.35 in.)	1.6 mm (0.06 in.)
Rear brake s	Brake drum I.D.		180 mm (7.09 in.)	181 mm (7.13 in.)
	Brake shoe lining thickness		4.3 mm (0.17 in.)	1.0 mm (0.039 in.)
Brake booster	Master cylinder fluid pressure at 0 kPa(0 mmHg, 0 in. Hg) of vacuum with pressing brake pedal	Pressed with 98 N (10 kgf, 22 lbs)	0 kPa (0 kgf/cm2, 0 psi)
		Pressed with 290 N (30 kgf, 66 lbs)	1,600 kPa (16 kgf/cm2, 230 psi)
	Master cylinder fluid pressure at 66.7 kPa(500 mmHg, 19.7 in. Hg) of vacuum with pressing brake pedal	Pressed with 98 N (10 kgf, 22 lbs)	3,400 kPa (34 kgf/cm2, 480 psi)
		Pressed with 290 N (30 kgf, 66 lbs)	9,800 kPa (98 kgf/cm2, 1,400 psi)
Brake booster	Master cylinder fluid pressure at 0 kPa(0 mmHg, 0 in. Hg) of vacuum with pressing brake pedal	Pressed with 98 N (10 kgf, 22 lbs)	0 kPa (0 kgf/cm2, 0 psi)
		Pressed with 290 N (30 kgf, 66 lbs)	1,600 kPa (16 kgf/cm2, 230 psi)
	Master cylinder fluid pressure at 66.7 kPa(500 mmHg, 19.7 in. Hg) of vacuum with pressing brake pedal	Pressed with 98 N (10 kgf, 22 lbs)	3,700 kPa (37 kgf/cm2, 530 psi)
		Pressed with 290 N (30 kgf, 66 lbs)	9,800 kPa (98 kgf/cm2, 1,400 psi)

Air Conditioning

Item	Measurement	Qualification	Standard or New	Service Limit
Refrigerant	Type		HFC-134 a (R-134 a)
	Capacity of system		400-450 g (14.1-15.9 oz)
Refrigerant oil	Type		KEIHIN: SP-10 (P/N 38897-P13-A01AH, 38898-P13-003, 38899-P13-A01)
	Capacity of components	Condenser	25 m[liter] (5/6 fl oz, 0.9 lmp oz)
		Evaporator	35 m[liter] (1 1/6 fl oz, 1.2 lmp oz)
		Each line and hose	10 m[liter] (1/3 fl oz, 0.4 lmp oz)
		Compressor	85-105 m[liter] (2 1/6-3 1/2 fl oz, 3.0-3.7 lmp oz)
Compressor	Starter coil resistance	at 68°F (20°C)	3.05-3.35 W
	Pulley-to-pressure plate clearance		0.35-0.65 mm (0.014-0.026 in.)
Alternator- compressor belt	Deflection with 98 N (10 kgf, 22 lbs) applied mid-way between pulleys	Used belt	7.5-10.5 mm (0.30-0.413 in.)
		New belt	4.5-6.0 mm (0.18-0.24 in.)
	Tension (measured with belt tension gauge)	Used belt	440-590 N (45-60 kgf, 99-130 lbs)
		New belt	980-1,130 N (100-115 kgf, 220-254 lbs)